Choosing the right garage door torsion spring

When it comes to garage doors, everyone knows that they are convenient when trying to go in and out of the house. Whether you are someone who owns a car or not, a garage room is essential in every household, as it is used for not only parking your car, but it also comes in handy when you are using the garage to store your supplies.

For years on end, you might use your garage door every day so that you can commute to and from work. And, in the middle of all that, you might also spend a lot of time opening and closing the garage door. The most important thing you might not know is that garage doors will typically start to wear out after 7-9 years of consistent, daily usage.

This is the time when you need to bend down and check on the wearability of your garage door torsion springs. Now, you may be someone who has been thinking of replacing them and buying new garage door torsion springs but is a newbie and does not know where to start.

Well, in this article, we will discover some steps that you should follow to determine when to change your torsion spring. So, let’s get started!

Things to check before buying a torsion spring

Wire size:

Perhaps the first thing that you will need to consider is the wire size. To see the thickness of a wire, you will need to measure out the distance between 10 and 20 coils and mark it to the nearest 1/16th of an inch. After that, experts will use what’s called a “Wire Chart” to determine the best measurements for your spring.


The next thing you will need to consider is the overall length of the torsion spring. The way that you can do this is to measure it from one end of the spring to the other. It should have the perfect length to fit your garage door. If it falls short, it will not be able to lift your garage door properly, and you will have a lot of issues.

Inside diameter

Following through, the inside diameter of the torsion spring is also critical, as it determines the amount of torque that your spring can produce. Usually, the measurement will be labeled on the stationary cone between the two springs. However, you can also measure it by yourself if you can.

Wind direction

Last but not least, taking a look at the wind direction of your torsion spring is also very important. The way that you can do that is to view the direction of your spring, as springs will usually turn clockwise and anti-clockwise, and you can use that to determine the wind direction. See if you need to change it and take the following action appropriately.


All in all, these are some of the things that you should consider before you try to see if you need to replace your torsion springs or not. If any of these factors check out or are out of place, then it is time to change the torsion spring so that your garage door can become new.